Livestock Trailers

Product Review

 

Gooseneck
• Lengths:16’, 20’, 24’, 28’, 32’
• Widths: 6’8” and 7’6”
• 6’6” bow height
• Bartop on 6’8” and aluminum top on 7’6”
• Open vertical 3/4” pipe front from neck down
• Three plank spaced sides
• 0.190” aluminum body and brush fender material (16’, 20’, 24’ length)
• 1/4” aluminum body and brush fender material (28’, 32’ length)
• Schedule 40 1 1/4” bow pipes on 2’ centers
• 6” channel cross members on 2’ centers
• 8” channel uprights
• Five 2”x2”x1/4” angle floor runners full length of trailer
• Boxed channels over axles
• 1/4” formed neck gusset
• 8” channel neck (16’, 20’ length)
• 10” channel neck (24’, 28’, 32’ length)
• Split tailgate
• 2”x2” square tube gate frame
• One crossgate (16’, 20’ length)
• Two crossgates (24’, 28’, 32’ length)
• Double T braces
• Upper T braces
• Stainless steel pins, rods, and bolts
• Treated pine floor, screwed down, 1/2” gap between boards
• Rubber dock bumper
• One spring loaded drop leg jack
• Electric brakes (all axles)
• Two - 7,000 cambered spring axles with 1/4” wall thickness (16’, 20’, 24’ length)
• Three - 7,000 cambered spring axles with 1/4” wall thickness (28’, 32’ length)
• Eight hole 16” wheels
• Mod wheel with stainless center cap
• 2 5/16” adjustable hitch
• LED 3-light bars
• Many optional features available
 
 
 
EBY
Model: Maverick LS
Gooseneck
• 16’ floor length
• 6’11” exterior width
• 6’6” or 7’ inside heights
• 3” J-beam cross members on 12” centers
• Aluminum diamond plate floors
• Center divide gate
• Full swing rear door with driver side slider door
• Passenger side entry door
• All DOT required markers and lights
• Durable all welded construction
• Easily pulled with a light duty pick-up truck
• GVW under 10,000 lbs.
• All aluminum, minimum maintenance
• No painting, ever
• Rugged design and construction for maximum durability
• Highest resale value
• Optional: Removable rubber floor liner
• Optional: Wall liners, plywood or rubber
• Optional: Smoke Plexiglas removable winter closure panels
• Optional: Tie rails and tie loops, inside or outside
 
 
 
Exiss
Model: STC 20 Gooseneck
• Lengths: 16’, 20’, 24’
• Interior height: 7’
• Exterior: 0.063 white aluminum skin with aluminum extrusion on sides of stock area
• Two air spaces with Plexiglas tracks
• Full-swing center gate with heavy-duty slam latch – STK 16, STK 20 – one gate; STK 24 – two gates
• Full-swing rear gate with slider and heavy-duty slider brackets
• Heavy-duty drop gate with spring loaded latches
• Two 7,000 lb rubber torsion axles with electric brakes
• Heavy duty streetside side unload door
• Extruded aluminum fenders
• Full length running boards
• Dome light in stock area with switch on rear frame
• Interlocking extruded aluminum flooring with 2”x4” I beams on 10” centers
• Kingpin hitch with 2 5/16” coupler, breakaway switch with battery and safety chains with slip hooks
• Single leg landing gear with removable handle
• One-piece aluminum roof
 
 
 
Featherlite
Model: 8127
• Gooseneck
• Lengths: 16’, 18’, 20’, 24’, 26’, 28’, 30’, 32’, 36’
• Width: 7’0”
• Two top air spaces with built in Plexiglass track
• Skid resistant interlocking extruded aluminum floor
• 16’-28’: two rubber torsion axles (7,000 lbs) with electric brakes. 30’: two rubber torsion axles (8,000 lbs) with electric brakes. 32’ & 36’: three rubber torsion axles (7000 lbs) with electric brakes
• Full swing center gate with slider door and slam latch (on select packages) available with up to three center gates depending on trailer length
• Curbside escape door
• Rear door is full swing stock gate with lockable slider and air space that match the sides
 
 
 
Merritt Equipment
Model: 16’ - 20’ Stock Gooseneck
• 3” aluminum crossmembers
• 3” flared holes
• 18” rear frame skid plates
• Divide gate hinge assembly
• Divide gate hold back
• Drop-down calf gate
• Interior load light
• Rear hinges with grease zerks
• Bearing assisted crank handle
• One-piece stretched roof
• Polished aluminum fenders
• Reinforced rear frame
• Reinforced sub frame
• Reinforced upper rear frame
• Smooth interior walls
• Turtle Back slam latch
• Numerous options including roll up rear door with varied punch patterns
 
 
 
Alum-Line
• Gooseneck
• 6’8” inside height – height increase/decrease on 6” intervals
• 6’10” inside width
• Non-skid tongue and groove aluminum extruded flooring
• Diamond plate floor with crossmembers on 12” centers
• Removable 5/8” vet pad mats
• Indoor/outdoor carpet
• Tubular side posts on 16” centers
• 2”x4” tubular rear frame
• Rear rubber dock bumpers across lower rear frame with skid plate
• Up to 10,000 lbs rubber torsion axles
• Optional triple axle set-up
• Electric brakes on each axle
• Side escape door
• Center partition gate with walk-through door
• Slam latches that open from both inside and outside of the trailer
• Easy latch hold backs on all doors and dividers
• Full opening back end gate with slide-by-side door
• 8’ gooseneck nose assembly with aerodynamic design
• Gate in nose of gooseneck
• 2 5/16” ball type coupler
• Side panel layout
• Two 5” air spaces toward top of trailer
• One 2” air space above fender
• Two inside dome lights
• Heavy-duty spring loaded landing leg
 
 
 
Titan
Model: 6’8”x20’ Stock Gooseneck
• Slope nose
• Escape door on passenger side
• Electric brakes on all four wheels
• Eight-bolt hubs with 9/16” studs
• Fold down calf gate in nose
• Spring loaded dual pin jack
• Spare wheel
• 3”x5” frame
• Spray on gravel guard
• Plexiglas track
• Safety transport chains and hooks
• Rubber rear bumper
• 6’6” inside height
• Torsion EZ lube axles
• Crossmembers, uprights & roof bows on 16” centers
• One dome light
• Sealed beam recessed L.E.D. lights
• Extended angle iron running boards
• Back gate with 1/2 slide, slam latch & butterfly latch
• Adjustable 2 5/16” coupler
• Seven-prong heavy cord with junction box breakaway
• Battery box with charger and tester
• Undercoating inside roof 20” up on insides and fender wells
• Reflective tape on trailers over 10,000 lbs GVWR
• Thirteen color options